Analisis Perbandingan Single Piston Dan Double Piston Terhadap Jarak Dan Waktu Pengereman Menggunakan Variasi Discbrake Pada Motor 125 Cc

Hakim Octa* -  Universitas Muhammadiyah Jember, Indonesia
Nely Ana Mufarida -  Universitas Muhammadiyah Jember, Indonesia
Kosjoko Kosjoko -  Universitas Muhammadiyah Jember, Indonesia

DOI : 10.24269/jtm.v4i02.9460

Safety is a major factor in planning and designing road facilities. Various studies related to accident risk analysis have been carried out, but there are still not many practical applications, especially for accident risk analysis at priority intersections. The method used in this research is a data collection method using a braking test process using single piston and double piston with standard disc brake variations. and after market. This research is intended to compare the braking distance and time using a variation discbrake. The results of comparative testing of single piston and double piston using a standard discbrake and a variation discbrake show that the maximum discbrake performance is the variation discbrake because it has a lower average braking time and distance than the standard disc brake. On a single piston with a pressure of 2kg, the average travel distance was 0.27 m (11.53 m - 11.26 m) with a time of 0.39 s (2.75 s - 2.36 s). Meanwhile, with a double piston with a pressure of 2kg, the average distance traveled was 0.06 m (8.50 m - 8.44 m) with a time of 0.15 s (1.88 s - 1.73 s). Variations in single piston braking greatly influence the braking distance and time, an average of 0.27 m with a time of 0.39 s from the standard discbrake, and variations of the double piston discbrake have a distance and time of 0.06 m with a time of 0.15 s from the standard discbrake.

  1. B. Susanto, S. Malkhamah, and L. B. Suparma, “Risiko Kecelakaan Sepeda Motor Pada Simpang Prioritas,” J. Transp., vol. 19, no. 3, pp. 161–170, 2020, doi: 10.26593/jt.v19i3.3668.161-170.
  2. Aslamatur Rizqiyah, “Angka kecelakaan lalu lintas terus meningkat, usia pelajar mendominasi,” GoodStats, vol. 19, no. 1, p. 1, 2023, [Online]. Available: https://goodstats.id/article/angka-kecelakaan-lalu-lintas-terus-meningkat-usia-pelajar-mendominasi-zYuep
  3. Jumadil Rangga Putra, “Pengaruh Massa Piringan Rem Cakram Terhadap Jarak Pengereman Pada Sepeda Motor Honda Supra X 125,” Automot. Eng. Educ. J., vol. 3, no. 4, pp. 1–6, 2014, [Online]. Available: http://ejournal.unp.ac.id/students/index.php/poto/article/view/3486/2380
  4. E. Prasetya, “Sistem pengereman pada purwarupa sepeda retro hybrid,” Sist. pengereman pada purwarupa sepeda retro hybrid, pp. 23–24, 2017.
  5. M. rafif iqbal Sopiyan,Darwin rio, “EFEK PENGGUNAAN DOUBLE DAN SINGLE PISTON CALIPER TERHADAP WAKTU DAN JARAK TEMPUH PADA PENGEREMAN SEPEDA MOTOR 125 CC The Effect of Double and Single Piston Caliper on Time and Distance of 125 cc,” vol. 8, pp. 18–27, 2023.
  6. I. Prasetyo, “Perbandingan Jumlah Piston Caliper Rem Cakram Terhadap Jarak Dan Waktu Pengereman Pada Sepeda Motor 110 Cc,” Elem. J. Tek. Mesin, vol. 7, no. 2, pp. 86–92, 2020.
  7. J. A. Ismet Eka Putra, “Analisa Pengaruh Beban Pengereman Dan Variasi Merk Kampas Rem,” vol. 3, no. 1, pp. 1–8, 2020.
  8. R. Suwarli, “Perbandingan Penggunaan Single Piston Caliper dengan Double Piston Caliper Terhadap Jarak dan Waktu Pengereman pada Roda Depan Kendaraan Sepeda Motor Revo Fit,” Automot. Eng. Educ. J., vol. 1, no. 2, pp. 1–6, 2015.
  9. Ajat Zatmika, K. Y. (2022). ANALISIS PERBANDINGAN DIAMETER PIRINGAN CAKRAM YANG BERVARIASI. JURNAL KALPIKA, VOL. 19, NO. 1, MARET 2022, 1-6.
  10. Ika Tyas Nurlina, K. N. (2021). Perbandingan Pengujian Rem Statis dan Rem Jalan pada Kendaraan pick up L300. Jurnal Teknik Mesin – AutoMech , 17-19.
  11. Muhammad Hasan Albana, Y. P. (2017). VARIASI JUMLAH LUBANG VENTILASI DISC BRAKE SERTA PENGARUHNYA TERHADAP JARAK PENGEREMAN DAN TEMPERATUR PERMUKAAN DISC. Jurnal Integrasi Vol, 9 No. 2, 125-128.
  12. Multazam, Z. S. (2012). Analisa Pengaruh Variasi Merek Kampas Rem Tromol Dan Kecepatan. Dinamika Teknik Mesin, Volume 2 No.2 Juli 2012, 100-107.
  13. Richard A.M. Napitupulu, C. S. (2022). Laju Keausan dan Kekerasan Kampas Rem Pada Sistem Pengereman. SJoME Vol. 4 No. 1, Agustus 2022 , 10-19.
  14. Fenoria Putri1)*, T. W. (2018). INOVASI PADA PENGEREMAN SEPEDA MOTOR KONVENSIONAL. Jurnal Austenit Volume 10, Nomer 1, 11-20.

Full Text:
Article Info
Submitted: 2024-06-03
Published: 2024-11-06
Section: Articles
Article Statistics: